About

Cost
$ $ $ $ $
Difficulty
• • • • •
Time
12h00

Use pearl trim to makeover a boring side table!
Glaze Coat resin and cheap pearl trim make a terrific table makeover!

Posted by Mark Montano Published See Mark Montano's 279 projects »
PrintEmbed
  • How to make a side table. Pearl And Resin Table Makeover - Step 2
    Step 1

    Stuff You'll Need
    Small round table
    Enough pearl trim to cover the top
    E-6000 Glue
    Glaze Coat epoxy resin
    Small torch
    Masking tape

  • Step 2

    Watch the quick video here:

  • How to make a side table. Pearl And Resin Table Makeover - Step 3
    Step 3

    Here's How
    1. 2. & 3. Starting in the exact center of the table, glue beads in a spiral until you reach the outer edge
    4. & 5. Create a rim/barrier edge around the table with two layers of masking tape
    *Make sure it's snug to the table and that the tape is higher than the top of the pearls
    6. Follow the instructions for mixing the Glaze Coat
    7. & 8. Pour the glaze coat on the table top and evenly distribute it with a sponge brush
    9. Pop the bubbles with a torch and let cure overnight
    *Make sure you cure your table in an unoccupied room free of dirt and dust
    10. Remove the masking tape
    11. If you need to, you can round the edge of the table with a sander
    12. Glaze the rough sanded edges with another layer of Glaze Coat and let cure

Made this project? Share your version »

Comments

More Projects