Cut Out + Keep

Pearl And Resin Table Makeover

Use pearl trim to makeover a boring side table!

https://www.cutoutandkeep.net/projects/pearl-and-resin-table-makeover • Posted by Mark Montano

Glaze Coat resin and cheap pearl trim make a terrific table makeover!

You will need

Project Budget
Reasonably Priced

Time

12 h 00

Difficulty

So-so
Medium 113988 2f2016 04 19 183707 square3%2bpearltable Medium 113988 2f2016 04 19 183713 square1%2bpearltable

Description

Glaze Coat resin and cheap pearl trim make a terrific table makeover!

Instructions

  1. Small 113988 2f2016 04 19 183811 collage%2bneeds%2bpearl%2btable

    Stuff You'll Need Small round table Enough pearl trim to cover the top E-6000 Glue Glaze Coat epoxy resin Small torch Masking tape

  2. Watch the quick video here:

  3. Small 113988 2f2016 04 19 183817 collage%2bhow%2bto%2bpearl%2btable

    Here's How 1. 2. & 3. Starting in the exact center of the table, glue beads in a spiral until you reach the outer edge 4. & 5. Create a rim/barrier edge around the table with two layers of masking tape *Make sure it's snug to the table and that the tape is higher than the top of the pearls 6. Follow the instructions for mixing the Glaze Coat 7. & 8. Pour the glaze coat on the table top and evenly distribute it with a sponge brush 9. Pop the bubbles with a torch and let cure overnight *Make sure you cure your table in an unoccupied room free of dirt and dust 10. Remove the masking tape 11. If you need to, you can round the edge of the table with a sander 12. Glaze the rough sanded edges with another layer of Glaze Coat and let cure