Learn how-to crimp in #TechniqueTuesday with Meredith from Meredith Joy Designs.
Feed One Crimp Bead or Tube onto the Beading Wire, then loop it through a Clasp and back through the Crimp. Be sure wires are side by side, not crossed.
Place the crimp in the OUTER jaw of the Crimping Pliers, make one firm compression. Many people skip this step, but this will shape the Crimp into an oval and help to keep the wires parallel, making a better final crimp.
Turn the Crimp 90` and place it into the Crimp Tool's semi-circle groove (outer jaw). Make another compression until the Crimp Bead or Tube is nicely rounded.
*Remember, crimping is a skill like any other. It takes practice, and a gentle hand. To get the crimp nicely even, rotate your hand around the crimp while gently pressing the jaws of the tool shut.
For a fancier finish, use a Wire Guardian and a Crimp Cover! Check out this Facebook Live to learn about some additional ways to fancy up your finishing!
Got the hang of this technique?
Put your new skill to the test with this tutorial:
Is there a certain technique you'd love to learn or one that you could teach us? Send us a message!