Satin Stitch

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Gather all your materials.

• 

  Step 2

  Put your material between the 2 hoops and tighten. To start with (for practise), draw a box with the pencil on your tightened material.

• 

  Step 3

  Thread your embroidery thread through the needle so its doubled up and tie a knot at the end. Now some people don't double it and tie the ends, but if your anything like me you find it starts to unravel.

  To start stitching, I start at the top corner on your pencil line.

• 

  Step 4

  Then sew on the bottom corner on the line. Come back to the top and insert your needle as close to where u first started and then sew down to as close as you can to the bottom of the stitch.

• 

  Step 5

  Keep going until your getting close to finishing your thread. Should look something like this.

• 

  Step 6

  When you have come to the end of your thread, turn over to the back and tie a knot. repeat previous steps till you reach the end of your penciled line.

• 

  Step 7

  Tie off on the back and voila, you have satin stitched

• 

  Step 8

  If your feeling a bit adventurous and want to do something other than a box, draw your design and do a running stitch on the penciled line.

• 

  Step 9

  And satin stitch it.

Comments

Leave your comment