About

Cost: $ $ $ $ $

Difficulty: • • • • •

Time: 1h30

PIKA PIKA CHUUU
I went as Pikachu to the rAge gaming expo this year.

Here's the tutorial for the headband I made! I also made the bag and the tail. I won the Chopper plushie (in the 3rd pic) at a stall.

If anything is unclear, don't hesitate to ask!

Posted by JossieAyame from Pretoria, Gauteng, South Africa • Published 19th November 2012 • See JossieAyame's 149 projects »

Tags

Print • Embed

Lindsay A. favorited Pikachu Ear Headband 26 Jan 21:21
Hannah C. favorited Pikachu Ear Headband 21 Oct 19:02
Tierra T. favorited Pikachu Ear Headband 26 Oct 20:15
BelleandStuff favorited Pikachu Ear Headband 05 May 17:46
Conner W. added Pikachu Ear Headband to craft ideas 10 Jul 23:59
Conner W. favorited Pikachu Ear Headband 10 Jul 23:59
Conner W. added Pikachu Ear Headband to fashion 29 Jun 21:07
Conner W. added Pikachu Ear Headband to anime/manga 29 Jun 21:07
Kichiru added Pikachu Ear Headband to Totoro, Pikatchu ~ kawaii animals 83 19 May 12:01
Kichiru added Pikachu Ear Headband to Cosplay *Q* apd 19 May 11:20

Step 1
Draw a Pikachu ear, adding extra space around the side for seam allowance and extra length so that you have extra felt to wrap around the headband
Step 2
Draw the tip of the ears, again allowing space for the seam.

The line on the ear is just to show how much extra I added to wrap around the headband
Step 3
One of the ears around the headband to see how long you want your ears and how far down you should sew. Add pins to mark it.
Step 4
Put the other ear's pieces inside out and use the reference to pin the sides together.

Pin the other one the same way using the already pinned one as a reference this time.
Step 5
Your ears should now look like this. You can now stuff them until they are as stiff as you want them.
Step 6
Now to make the headband yellow!

Use your headband to measure how long and thick your yellow felt should be to wrap around it. Remember to leave extra space so that they can overlap. You can always cut off excess felt later.

You may notice that I cut my pieces so that they are narrower at the ends. This just makes it easier to stick because of the shape of my headband.
Step 7
Another pair of hands will be helpful here.

While one person operates the glue gun and puts a line of glue on the inside of the headband, the other person must start sticking the felt onto the headband. Be careful because the glue may seep through the felt and burn you.
Step 8
Neaten the edges and make sure everything is stuck on properly.

Your headband should now look like this.
Step 9
Position the ears and stick them on, making sure that the middle of the ears sit in the middle of the headband (so that the angle will be correct).

When you have stuck one side, stick the other side on, pulling it so that it sits as tight as possible and no or hardly any stuffing is showing.
Step 10
If there is a little bit of stuffing showing, like in the pic, use one of the points of a fork to carefully push it out of sight.
Step 11
And you're done!