About this project
You Will Need
This is a cage toy for my Sugar Gliders.
How I did it:
I started with two PVC caps, screwed holes in the top center of them, screwed in metal hooks, then hot glued those onto the ends of a ten foot piece of nylon rope. Next I laid out a six inch wide by ten foot long piece of fleece and folded it in half length wise. I used a rotary cutting blade to cut strips on the open end (cut about two and half inches in, I didn't measure, this is just an estimate). Then I unfolded the fleece and laid the rope in the center length wise, then tied the strips together anround the rope, and I was done.