Ruffle Pillow Diy

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Pattern: You pattern is printed on 8.5” by 11” paper. You will need to tape the pages together following the column and row numbers, matching the corner markings.

• Step 2

  Cutting: Cut 2 fabric
  
  Cut 9 bias strips, 1" wide, 20" long. You can have 3 strips of each different materials.

• 

  Step 3

  make gathering stitch on the ruffle strips
  - Make sure you change your stitch length to the longest stitch length.
  - Make a stitch line ¼” away from the edge. Do NOT back stitch and make sure to leave a long thread at each end.

• 

  Step 4

  - Make a stitch line ½” away from the edge. Do NOT back stitch and again make sure to leave a long thread at each end.

• 

  Step 5

  - You will need to make gathering stitch for all the remaining strips.

• 

  Step 6

  Pull the two threads on the top GENTLY and you will see the ruffle coming together.

• 

  Step 7

  You will need to keep pulling and move the ruffle along the strip until your strip measures 10.5”

• 

  Step 8

  In total, you should have 9 ruffles. Place them in the order that you want on the pillow.

• 

  Step 9

  Stitch the first ruffle on the pillow front. On your pattern, you will find the ruffle placement line.

• 

  Step 10

  Once your first ruffle is stitched and secured, you will continue to stitch the second, third, and so on.

• 

  Step 11

  This is what it should look like after you stitched all 9 strips.

• 

  Step 12

  Stitch the pillow front and back together. Make sure you leave an opening approximately 3” at the bottom of the pillow.

  Your seam allowance is 1/2"

• 

  Step 13

  Turn the pillow inside out and stuff it.

• 

  Step 14

  Hand stitch the opening closed.

  And you are done!

Comments

Leave your comment