Monster Ipod Case

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  First grab your ipod, music player or even phone and get a piece of felt of any colour you like. In this case, I chose lime green.

• Step 2

  Next, get a piece of paper and place your ipod on top. Make sure there is a seam allowance and draw that. Then, draw around the ipod. (If that's too complicated see the next picture)

• 

  Step 3

  You should end up with sort of template. The inner rectangle is where the ipod will be and the outer rectangle is the seam allowance. (Appologies for the messy outline as I was doing it quickly)

• 

  Step 4

  Cut out the template following the outer rectangle. If there are some wobbly lines, as there are on my template, you can neaten them up when cutting it out.

• 

  Step 5

  Pin your template to your chosen fabric and cut it out.

• 

  Step 6

  Repeat step 5 to get 2 pieces of felt that are the same size and shape.

• 

  Step 7

  After that, cut out some features for your monster. I cut out a small eye and a big eye and drew pupils on them with a black permanent marker. I also cut out a black circle for the mouth and a set of teeth. RAWR! Haha

• 

  Step 8

  Using chalk, outline the rectangle of your ipod so you know where to sew and where not to put the facial features. Put the monsters features into the position you would like them to be, then glue them into place.

• 

  Step 9

  Get both pieces of felt and put the right sides together.

• 

  Step 10

  Pin along the chalk lines.

• 

  Step 11

  Then sew along the chalk rectangle using your embroidery thread and needle.

• 

  Step 12

  Turn it inside out.

• 

  Step 13

  Put your ipod into the case to see if it fits.

• 

  Step 14

  Then you have your monster ipod case!!

Versions

+ Add your version

Posted by

Sarah

Posted by

Charley

Comments

Leave your comment