How To Make Your Own Jewelry Make Your Own Necklace For A Party

  ✂︎

Favorite

Comment

List

       

Share

• Step 1

  add on the Iron Bead Tip

  Prepare two sections of 1m long tiger tail wire; then feed the Iron Bead Tip*1 and Spacer Bead*1 onto one end of both. After that, squash the Spacer Bead, then close the Iron Bead Tip and cut off excess wire part.

• 

  Step 2

  add beads

  Pick up both two wire, string the transparent 12/0 Glass Seed Beads one after one. During that, try some other beads groups for making your own necklace more standing out, such as the Green-Yellow Swarovski Crystal Beads and Brass Rhinestone Beads I used here.

• Step 3

  Make the main part of necklace

  As the diagram shows, this whole necklace making instructions about how to make your own jewelry can be clearly divided into 3 parts, namely, the three parts marked with alphabet a, b, c in the diagram.

  In this step, I will show you how to make the Part c and Part a by yourself.

• Step 4

  Part c in this necklace making instructions:

  Firstly, add 12/0 Glass Seed Bead*3 onto each wire tip and then cross two tips through one another 12/0 Glass Seed Bead;

  Secondly, add 12/0 Glass Seed Bead*2, 203-Tapaz Swarovski Crystal Bead*1 and 12/0 Glass Seed Bead*2 onto each tip, then cross two tips through one 12/0 Glass Seed Bead again;

  Thirdly: reversely repeat the above two parts.

  Finally, thread beads onto each wire in order of: 12/0 Glass Seed Bead*1, 203-Tapaz Swarovski Crystal Bead*1, 12/0 Glass Seed Bead*1 and 203-Tapaz Swarovski Crystal Bead*1; then cross two tips through one 12/0 Glass Seed Bead.

• 

  Step 5

  Part a in this necklace making instructions:

  Firstly, repeat the final process in part c;

  Secondly: to the above wire tip, thread beads in order of: 203-Tapaz Swarovski Crystal Bead*2, 12/0 Glass Seed Bead*1, 203-Tapaz Swarovski Crystal Bead*1, 12/0 Glass Seed Bead*1; then feed the tip through the adjoining 203-Tapaz Swarovski Crystal Bead and the 203-Tapaz Swarovski Crystal Bead added at beginning;

  Thirdly, to the below tip, add the beads as following orders: 203-Tapaz Swarovski Crystal Bead*1, 12/0 Glass Seed Bead*1, 203-Tapaz Swarovski Crystal Bead*1, 12/0 Glass Seed Bead*1 and 203-Tapaz Swarovski Crystal Bead*1;

  Fourthly, cross two tips from one 12/0 Glass Seed Bead;

  Finally, repeat the starting part.

• 

  Step 6

  After that, repeat the part b and part c for completing making your own necklace.

• 

  Step 7

  Enclosing beading diagram:

Comments

Leave your comment