About

Cost
$ $ $ $ $
Difficulty
• • • •
Time
30 mins

Two different ways of creating stamps
Learn how to make stamps in two different ways, one using rubber other using a recycled tetra pack package and leftover pieces of craft foam.

Posted by CurlyMade from Lisbon, Lisbon, Portugal • Published See CurlyMade's 30 projects »
PrintEmbed
  • How to make a stamper. Diy Stamps In Two Different Ways - Step 1
    Step 1

    If you are going to make rubber straps, a good way to make sure the stamp will be exactly as you want it, is freehand or print a piece of paper with the design you want to create and trace it onto the rubber. Then you just have to cut it following the lines.

  • How to make a stamper. Diy Stamps In Two Different Ways - Step 2
    Step 2

    To make the craft foam stamps, I started by making the base of the stamp where you will be gluing the foam. I used a tetra pack package, cut it in squares and small rectangles and hot glued several layers together till I had the size I wanted.

  • How to make a stamper. Diy Stamps In Two Different Ways - Step 3
    Step 3

    Finally, cut the craft foam with the shape you want, and glue it to the base.

  • How to make a stamper. Diy Stamps In Two Different Ways - Step 4
    Step 4

    And it's finished :)

Made this project? Share your version »

Comments