About

Cost: $ $ $ $ $

Difficulty: • • • • •

Time: 1h00

look cool this Fall/Winter... for the price of $2 (inspired by the Knotted Loop Scarf by Country Road!)
got the XL Men’s tee from a discount store for just $2. The scarf was inspired by a scarf of a similar design by Country Road. I'm quite sure it's from Country Road because I've seen it in the shop. But I just can't find a picture of it online!

It seems to be really well-liked here because I’ve seen 2 people in my class wearing it. But this is something that I am making for a friend of mine. Oh, oh and this is the very first project that I did with my NEW Elna Sew Fun sewing machine!!! All right, enough with that introduction and monologue. Let’s get on with the tutorial! :D

Image of the Country Road Scarf above is from here:This is what this scarf was inspired by:
Knotted Loop Scarf by Country Road for their A/W 2010 Collection.

Image from here:http://www.whatswhat.com.au/fashion/pdf/2010_winter/country_road_style_notes.pdf

Posted by gwenstella from Sydney, New South Wales, Australia • Published 25th August 2010 • See gwenstella's 41 projects »

Print • Embed

elarablair favorited Diy: Knotted Double Layered Scarf From Xl Men's Tee 23 Feb 18:17
annie.g favorited Diy: Knotted Double Layered Scarf From Xl Men's Tee 11 Jan 04:04
cristinakilljoyway favorited Diy: Knotted Double Layered Scarf From Xl Men's Tee 04 Jan 00:03
gwenstella entered their project Diy: Knotted Double Layered Scarf From Xl Men's Tee to The Ultimate DIY Competition 27 Aug 10:12

Step 1
Get your XL tee!
Step 2
Cut your tee according to the picture. A and B should be about the same width and C is from the the sleeves.

One tee will yield 2 As, 2 Bs (the second one is underneath), 2 Cs and 1 D.
Step 3
Get A and open it up. There should be an open side where the C/the sleeves were cut off.

Fold A into half, lengthwise, with the RIGHT side of the fabric facing each other, such that the open sides meet at the dotted line.

Sew along the dotted line.

Open A up and you should get a rectangular piece of fabric. Do the same as above for the other piece of A.
Step 4
Put the 2 pieces of A together, with the RIGHT side of the fabric facing each other so that the ====, ++++ and .... are in line with each other.

Sew along the ==== lines together and then open the piece up.
Step 5
Fold the piece lengthwise such the ++++ side meets with the …. side with the RIGHT side of the fabric facing each other. The picture shows only one piece of A. The other one is out of the frame. The 2 pieces of A form a very long piece of fabric.

Sew ++++ and .... sides together.
Step 6
Turn this long piece of 2 As inside out and you will get a long tube of fabric with all the clean seams on the outside.
Step 7
Get C and cut the seams so that it opens up as shown in the picture.
Step 8
Get one C and one B. Line the sides ==== and ++++ together, with the RIGHT side of the fabric facing each other. Sew ==== and ++++ together.

Do the same for the other B and C.
Step 9
You will get 2 long strips of fabric as shown in the picture, each made from B&C.
Lie the 2 B&C strips on top of one another, RIGHT side of fabric together.

Sew the sides together to get a tube like with A previously.

Fold the 2 tubes of fabric inside out so that all the clean sides are facing outside.

The tube from A should be longer than the tube from B&C.
Step 10
Tie 3 knots in tube A, where the second knot is right in the middle of the tube.

Tie 2 knots in tube B&C, such that the knots have a space in between.

Lie the 2 tubes of fabric parallel to one another. The knots in tube B&C should be next to the spaces between the knots in tube A.
Step 11
Holding the 2 ends of the tube together, try and see how it looks on your neck. Adjust how you want the 2 layers to look before sewing the ends together.
Step 12
It’s ok if the edges of the ends are not exactly together. That was also what happened to mine.
Step 13
Fold/Roll the ends neatly into half, as shown in the picture.
Step 14
Now, the final piece! Get D, open it up and cut it as shown in the picture to get a small rectangular piece of fabric.
Step 15
Join the ends of the 2 layers together, and then wrap it using D. You may want to fold the raw edges of D inwards as you wrap the ends together.
Step 16
Sew it in place! You may want to do hand sewing for this last step instead as the fabric gets really thick here and you may want to hide the stitches with some strategic stitching.
Step 17