Diy Jumper

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Get a plain jumper:)
  I got mine from Amazon - Fruit of the loom, cost around £8 ish.

• 

  Step 2

  Cut out what you wish to put on your jumper, it could be anything from a heart to a cross, but make it easy-Ish so you can put studs around it!:) try to make it even- unless you're not into symmetrical stuff.
  If the material is quite transparent (like mine was) cut out another piece of the same or a different material to just put underneath :)

• 

  Step 3

  Get your studs! I needed around 100ish.
  I also ordered these off Amazon, I couldn't find them anywhere else, they were around £3 :)
  I recommend the ones that have 4 little teeth rather than 2 teeth, they hold better in the jumper:)

• 

  Step 4

  Glue on your cross or whatever shape you've chosen to do:)
  Put the glue all around the edges so it stays in place!

• 

  Step 5

  Start putting your studs in!:)
  Try to put them through your cross as well since you don't want it to frey or come off, so basically the studs hold it in place!:)
  I wouldn't recommend you using your fingers or nails to push down the teeth of the studs (I did this, ouch) because you,might ruin your nails!:( I used the back on my tweezers :)
  And careful- don't stab or prick yourself too much! Hehe

• 

  Step 6

  Phew! That took a while didn't it? Or is it just me?:')
  Well done for getting this far and still being alive!
  Now, you can either leave it like this...OR...

• 

  Step 7

  Add some studs on the collar (if you have a collar on your jumper)
  I think it looks pretty neat, huh?:)

• 

  Step 8

  The gap was just two of my fingers:)

• 

  Step 9

  AND...Voila! YAY!
  Your unique jumper is made!:)
  Hope you have fun crafting:D

Comments

Leave your comment

ModernMyth Angel · Skegness, England, GB 20th September 2013

I love this idea! It looks great! Well done!xx

Reply