About

Cost: $ $ $ $ $

Difficulty: • • • • •

Time: 2h00

DIY CUPCAKE TRIVET
Being a sewing studio, we have boxes full of scrap fabrics. It’s time to use them up! So we created this cute DIY project to share with all those who are sewing addicts like us, living with boxes of scraps fabrics.
P.S This is a great gift for your baking friends.

Posted by Dilys T. from Toronto, Ontario, Canada • Published 8th April 2021 • See Dilys T.'s 8 projects »

Downloads

2021-02-04-005656-cupcakke+trivet+pattern+1+of+2.jpeg 274 KB [ Download ]
2021-02-04-005705-cupcake+trivet+pattern+2+of+2.jpeg 294 KB [ Download ]

Print • Embed

Dilys T. published their project Cupcake Trivet 08 Apr 09:00

Step 1
Cutting

- Cupcake top: cut 2 fabric, cut 2 batting
- Cupcake bottom: cut 2 fabric, cut 2 batting
- Eyes : cut 2 fabric, cut 2 heat n’ bond
- Eyes twinkle: cut 2 fabric, cut 2 heat n’ bond
- Mouth: cut 2 fabric, cut 2 heat n’ bond
- Cheeks: cut 2 fabric, cut 2 heat n’ bond
Step 2
Place the right sides of the cupcake bottom fabric facing together, then place the batting on top of the wrong side of the fabric. Pin everything in place. (diagram 2)
Step 3
Stitch all around, just make sure you leave an opening at the top

**your seam allowance is 3/8"**
Step 4
Clip the corners
Step 5
Turn the right sides out
Step 6
Stitch the lines on the cupcake bottom
Step 7
Cupcake Top

Place the right sides of the fabric facing together, then place the batting on top of the wrong side of the fabric, pin in place.
Step 8
Stitch all around, make sure you leave an opening at the top
Step 9
Trim all the seam allowance to approximately 1/8” and turn the right side out
Step 10
Hand stitch the opening shut
Step 11
Place the cupcake bottom behind the cupcake top. Hand stitch the cupcake bottom to the cupcake top
Step 12
You will want to hand stitch the cupcake top to the cupcake bottom on the front side
Step 13
fuse the heat n’ bond to the face pieces and apply it to the cupcake bottom