Camera Pouch

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Cut out both pieces of fabric using the pattern. You will have to scale the pattern up as the download is a third of the size.

• 

  Step 2

  Once you have cut out both of your pieces of fabric you will need to sew the top part together (the part with the curve) which will form the flap to go over the camera.

• 

  Step 3

  Once you have made the curve on both pieces of fabric, lay them down right sides together and sew along the outside of the fabric piece.

• 

  Step 4

  Making sure you leave two gaps in the bottom diagonal corners.

• 

  Step 5

  Cut out the wadding so that is is slightly smaller than the sewn edge of the fabric.

• 

  Step 6

  Pull the wadding through as you turn the fabric right side out.

• 

  Step 7

  When you have pulled it through you will be able to put your hands inside the gaps you left to make sure the wadding is in the right position.

• 

  Step 8

  Place the bottom section right sides together.

• 

  Step 9

  Sew along the bottom edge and up the join to make the pocket and pull through to the right side.

• 

  Step 10

  Your pouch is now ready for the camera.

Comments

Leave your comment