About

Cost
$ $ $ $ $
Difficulty
• • • • •
Time
1h00

Woven Hexie Ornament
Okay so like this is a total scrappy/ charm-square-friendly project. And if you’ve never woven fabric and have been all scurred or intimidated, get over it because this is so manageable even though it has a bunch of steps.

Posted by Mister Domestic Published See Mister Domestic's 7 projects »
PrintEmbed
  • How to make an ornament. Woven Hexie Ornament - Step 1
    Step 1

    To get there, draw three horizontal lines 1.5″ apart. Then draw lines going 30 degrees both ways on an imaginary horizontal line also 1.5″ apart. Boom there you go.

  • How to make an ornament. Woven Hexie Ornament - Step 2
    Step 2

    Cut 3″ strips of whatever fabric you wanna use. I used two colors and needed a 30″ strip of each color.
    Then iron the length of the strips with the edges folded into the center.
    Next fold in half lengthwise and iron it and then top stitch on both sides of the pressed strip.
    Cut these finished strips into 5″ pieces. You should end up with 6 of each color.

    Layer 1 of the Weave

    Pin down the four vertical strips right next to each other.

  • How to make an ornament. Woven Hexie Ornament - Step 3
    Step 3

    Layer 2 of the Weave

    Start weaving from the bottom up using this pattern from the right to left:

    Over one, under two, over one
    Under one, over one, under two
    Under two, over one, under one
    Over one, under two, over one

  • How to make an ornament. Woven Hexie Ornament - Step 4
    Step 4

    Layer 3

    Follow these pictures.

  • How to make an ornament. Woven Hexie Ornament - Step 5
    Step 5

    Pat yourself on the back and stare at what you did for a minute or two or five.

  • How to make an ornament. Woven Hexie Ornament - Step 6
    Step 6

    PREPARING YOUR HEXIE
    First you need to secure your weave with tape. Place a piece of tape on the inside of the edge of the woven hexie part.

  • How to make an ornament. Woven Hexie Ornament - Step 7
    Step 7

    npin your weave. No worries it’ll be all good.

    Now, using a stitch length of 1.4, sew right on the outside of the tape that forms the hexagon. Once you’ve secured the perimeter, remove the tape and trim 1/4″ outside of this stitch line.

  • How to make an ornament. Woven Hexie Ornament - Step 8
    Step 8

    Once again pause and look at what you just did and happy clap.

  • How to make an ornament. Woven Hexie Ornament - Step 9
    Step 9

    BINDING THE HEXIE

    Cut a strip 1.5″ wide. Iron it like the strips you did up top but don’t edge stitch it.

    With this folded strip, glue baste in place. I mean like if you wanna be all brave and bind it on the regular, go for it, but I glued first.

  • How to make an ornament. Woven Hexie Ornament - Step 10
    Step 10

    When you get to the end, snip it and fold it as such.

  • How to make an ornament. Woven Hexie Ornament - Step 11
    Step 11

    Next edge stitch the binding onto the hexie and boom you have your pre-ornament woven hexie. And like legit I see so many things you can do with this so if you ain’t into ornaments, make yourself a coaster or something.

Made this project? Share your version »

Comments

More Projects