About
Make funky wire wrap rings
These rings are surprisingly easy to make and only use two supplies, wire and beads! These are tons of fun to make and are great gifts.
-
Key West Witch added Wire Wrap Rings to Rings
30 Jun 06:52
-
Carla B. favorited Wire Wrap Rings
24 Jun 02:10
-
RunsWithScissors favorited Wire Wrap Rings
07 Sep 23:28
-
DAARSHENI favorited Wire Wrap Rings
14 Jul 02:31
-
GiftedDiva24 added Wire Wrap Rings to Diy Jewelry
27 Mar 13:24
-
GiftedDiva24 favorited Wire Wrap Rings
27 Mar 13:24
-
RareJewel favorited Wire Wrap Rings
11 Jan 09:12
-
Kathy C. favorited Wire Wrap Rings
14 Nov 03:29
-
Adrienne the Crafty Little Gnome published her project Wire Wrap Rings
11 Nov 09:00
You Will Need
-
Step 1Start by cutting about two feet of wire and stringing your bead on it. Bend the sides of the wire down.
-
Step 2Wrap it around your ring mandrel using the sizing gauge on the mandrel to make the correct size ring for your finger.
-
Step 3Wrap the wire around the mandrel twice and then start wrapping the wire ends around the bead.
-
Step 4Keep twisting it around the bead. You can make it really tight and smooth or messy and birds nest-like if you want.
-
Step 5Once it is wrapped around the bead to your desire take the ends and start wrapping them around the band of the ring. Use your pliers to help wrap it tight. Loop it about 3 or 4 times.
-
Step 6Alternatively, you can take the free end and make it into a spiral. Use your pliers to start to spiral the wire and roll it right up to the base of the ring.
-
Step 7Once you have the basics down you can experiment by trying out different beads and different ways of twisting the wire.
