Teddy Bear

  ✂︎

Favorite

Comment

List

       

Share

• Step 1

  You can stitch it by sewing machine or hand.
  Download the pattern, print it and cut out. You can change size of the pattern before you print it if you want; my Teddy Bear is about 17-18 cm tall.

• 

  Step 2

  Lay out all the items of pattern onto the wrong side of the fabric and trace them (using chalk or a marker).
  The parts № 1, 6, 9, 10, 11, 12 trace in the direct and mirror image.
  The part № 5 trace 2 times in the direct and 2 times in mirror image.
  The picture shows an outline of the layout.
  Don't forget to transfer onto your fabric all the marks.

• Step 3

  Cut out all the items with 5 mm (or more) seam allowances.

• 

  Step 4

  EARS. Put the items № 5a and № 5b right sides together and sew them on a rounded edges. Turn out and sew the open sections. Incise edge (near mark 4) close to the seam.
  Do the same with items № 5c and № 5d.
  Sew ears to the items № 1a and № 1b (combining marks 1-4-2).

• 

  Step 5

  HEAD. Sew darts on items № 1a and № 1b.
  Sew item №2 between items № 1a and № 1b (marks 3-4).
  Sew item № 3 to the front of the head, combining marks 6-5-6. Next, sew from mark 7 to mark 6 and perform the seam on the nose.
  Sew darts on item № 4. Sew together the front part of the head and item number 4 (marks 8-9-8). The head is ready!

• 

  Step 6

  FRONT. Put the items № 6a and № 6b right sides together and sew them from the mark 7 to mark 12. Sew darts on both parts.
  Items № 11a and № 11b sew to the items № 12a and № 12b respectively (marks 10-11).
  Sew the item № 11a with № 6a; № 11b with № 6b (marks 19-20).

• 

  Step 7

  BACK. Sew the dart on item № 7.
  Sew the item № 7 to the item № 8 (marks 17-18-17).
  Sew the items № 10a and № 10b to the item № 7(marks 8-19).

• Step 8

  Put the front and back of the torso right sides together and sew them combining marks 21-11-10-19-17-15. Next, sew them combining 13-12-13.
  Sew the items № 9a and № 9b to the body (combining marks 13-14-15-16).

• Step 9

  Turn the head and the body right side out.
  Stitch the back part of the head to the back part of the body by hand (combining marks 8-8).
  Fill the bear with wadding. And then stitch up the remainder of the neck (8-7-8).

• 

  Step 10

  Embroider nose and mouth according to the scheme.

• Step 11

  Make the eyes from Fimo:
  make a ball, cut in half;
  make 4 holes (use toothpick);
  bake.
  You can also use buttons instead eyes.
  Sew the eyes on the places marked X.

Versions

+ Add your version

Posted by

Vicki O.

Comments

Leave your comment

Vitamin D Designs 22nd January 2018

@ksew Thank You for sharing, I know I'm too late to join any conversation since this was posted '11 but I am a new to sewing so I will enjoy this in silence. I was gifted a Singer Featherweight so now I am trying to learn as much as I can about sewing...
Thank You and God Bless.

Reply

marla k. 9th November 2011

sweet I have searched the web over looking for a teddy bear nose and now I see so now I must sew. Thank you sew much Bassaccse

Reply

Chelleylane · Gold Coast, Queensland, AU · 8 projects 8th April 2011

Well done! What a professional looking bear

Reply

Ksew · Novokuznetsk, Kemerovo Oblast, RU · 21 projects 21st January 2011

Mrs. N: you are welcome!
Angel Eve: unfortunately no. I redrew the pattern from old magazine (and made some little changes).

Reply

Mrs. N · 2 projects 21st January 2011

i SO needed this!!! thanks!!

Reply

Angel Eve · La Cañada Flintridge, California, US · 11 projects 17th January 2011

Did you draft this pattern yourself?

Reply

Mystery Craft Girl · Algiers, Algiers, DZ · 36 projects 17th January 2011

adorable!

Reply