Gather your materials and plug in your iron.
Cut strips of webbing after measuring it around the widest part of your hand (add 2" for gluing bracelet into a cuff).
Make pencil mark on webbing that shows size of your hand (and remember not to glue trim past this point).
Cut rhinestone trim accordingly, so that the length matches the webbing length up to the pencil mark.
For each piece of webbing, there should be two identical pieces of rhinestone trim (unless you want to mix-and-match colors, of course!)
Lay rhinestone trim on webbing and cover with a piece of paper.
Iron on high for 30 seconds, repeating process three times.
Let cool completely (and be careful, it's going to be hot).
Once cool, clip away any excess rhinestone trim.
Roll webbing in the shape of a cuff and glue together, using the 2" of webbing left un-embellished.
TIP: Hold with a clip while it dries.
Try on your new bracelets!