Make and Share Craft Tutorials
Re Design....Second Life For A Colorful Blazer!!
About
Published
over 2 years ago
Time
Difficulty
I had this blazer or jacket for a couple of years now... thought of getting rid of it several times, but never actually did, just because I sort of love the color!! it´s a color that I normally don´t see everyday... so I kept it in my closet and had this idea from a Burda Magazine in mind for some months... and a few days ago finally went to the fabric store and finally bought supplies...
Check out what I did to give a second life to this piece:
Crafts
Instructions
-
1
This is the boring blazer... but nice color:
-
2
Fabric store and got 1/2 yard of each color: light pink and a redish-orange one.
-
3
Measure fabric from the side and mark with scissors future strips of 3 - 2 - 1 inch do this with each color, ripe it out by hand and take away the little thread that will come out of it, until each strip of fabric is nice and clean, and you are sure that is not gonna come any more thread from it....
-
4
All cut ready to remove the bottoms of the blazer and start pining the strips.
-
5
just start pining from the collar down, don´t do it all the way around cause it´s going to curve on the top, and look weird.... so cut strips in have and start from the top down, do it as you like, go crazy a bit.... then sew with zig zag the ones on the bottom. And let the ends loose so it has some movement...
-
6
The skinny ones I pinned them on top of the showing zig-zag, and by hand, every 5 inches I sew a little bit, that you can´t even notice... and then... tadddaaaaa, voilá it´s ready to wear!!!
Have fun!!!
Comments
Recent Favorites
