This project is BASED ON THREADBANGERS Bunny ear hat.
For this prodject you NEED to download their pdf pattern for the hoodie (and bunny ears).
LINK 1: http://www.threadbanger.com/tb-projects/episode/THR_20090410/how-to-make-bunny-ears-threadbanger-projects
LINK 2: http://www.threadbanger.com/post/12052/bunny-ear-pattern
Print out the pattern, cut out and tape it together.
Gather the rest of needed things
First get the material for the outside of your hoodie (i chose blue)
Pin the pattern down. draw about 1.5 cm seamroom around the pattern.
then cut it out like so...
you will need 2 of these
so lay out some more material
get the pattern and turn it over so that it'll be the OPPOSITE side of your first piece
(Don't forget 1.5 cm seamroom!!)
Should look like this :)
(click on picture for zoom)
Lay the 2 pieces together right side inwards.
sew along the red line i've drawn on the picture .
Half way done now :)
Cut of any exsess material
what it should look like now
Now for the inside of the hoodie:
Repeat steps 2 and three.
NO NEED FOR SEAMROOM NOW!!
Lay the two pieces together and sew again like step 5!
Cut of any excess material
Nearly finished now!
Turn both of your hoodie pieces inside out, putting the inside piece on top of the outer side piece: like so
Line the seams up as straight as possible
Pin the tops of the hoodie together and sew straight across
(Click on picture for zoom!)
Cut of excess
Now down to the neck of the hoodie:
Mark off two lines of either side of the main seam. This will be the part when we turn the hoodie the right way round.
Sew just up to both marks
Like soo (click on picture to see)
Cut off any excess again ;)
Now turn the whole thing round the right way through the hole you've left
Oh yeah :D
Sew the hole up and your done !! YAY :D
The fun part
Go crazy, go wild get your creative head on a decorate your new cute hoodie!
The bunny hat is the Threadbanger hoodie, but the fish, dino, tiger and eeyore hoodie are my design :)