Bottlecap Magnets

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  first, you need to get bottle caps,clean them ,take out the rubber thats inside of it.

• 

  Step 2

  now take the hammer and hammer the bottlecap flat, to get it extremely flat you´ll need to turn the cap a little. you may want to put some cloth over the cap to protect the varnish on top of it.

  WATCH YOUR FINGERS

• 

  Step 3

  you should have a flat round piece of metal.
  if there are messages on de sides of the cap youre cap is done(i did so with the aloha-cap) but you can also make the metal-plates smaller by cutting them ,you can even cut them into form with a wire-cutter.

• 

  Step 4

  all you need to do now is, to glue the bottlecaps to your magnets.i used old magnets from ugly ones i didnt like anymore, but i think you can buy magnets in craftstores and building centers. i used hot-glue but superglue might do well.
  and you re done :)

Comments

Leave your comment

Suppe · Hamburg, Hamburg, DE · 8 projects 7th June 2009

Ha, an Astra-drinker!

Reply