https://www.cutoutandkeep.net/projects/recycled-winnie-the-pooh-notebook • Posted by Tara Gypsy Apples
i'm so sorry i'm so horrible at explaining. if you don't understand something, just ask:)
i'm so sorry i'm so horrible at explaining. if you don't understand something, just ask:)
1.get a piece of cardboard.(i used the back cover of a used up exam pad) 2.cut it in half. these two pieces will be your front and back covers
this step isn't necessary, ijust don'y like writing on the first page of notebooks so i did this: 1.measure your cardboard pieces 2.measure two pieces of blank paper 1cm shorter at the top,bottom and side than the cardboard pieces these will be your first and last page
1.measure lined pieces of paper using the same measurements you used for the blank pages 2.i stacked the pages and cut them with a craft knife to save time so you dont have to go cut each page individually these will be the actual pages of the notebook
1.take your piece of wire and twist it around your pencil this will be the "spine" of the notebook
1.put all yur bits together like this: 1 piece of cardboard 1 piece of blank paper lined pages(i used 40) 1 piece of blank paper 1 piece of cardboard use those big paper clips to hold all the pages in place 2.make holes down one the side of the notebook 3. thread the wire though the holes. DONE:)