https://www.cutoutandkeep.net/projects/kandi-cuff • Posted by BoxieeBear
So this is step one and the start of step two. First, you need to make a single bracelet and tie it off. I like to do every other one a base color, like black or white. For this bracelet, I chose black. The reason for this is because the black will be the outer layer to the cuff. Second, you need to cut another piece of string, a little bit longer then the first one, and you need to put it though one of the colors you want on the INSIDE.
Now, this might be kind of tricky to explain, but here we go. On the piece of string you just looped through thread on a bead, and loop it though the next colored bead. It's pretty much like weaving. Doing this will push the black bead down to start the outer layer.
Keep doing the last step till you eventually work your way all the way around the bracelet.
It should look like this when you've threaded on all the beads. IMPORTANT: YOU NEED TO REMEMBER TO PULL IT TIGHT. Now tie it off...
Now you have your first two layers!
Now we pretty much just need to repeat step 2-5. But this time, you've weaving through the last later of beads. In this picture, I'm working on the last layer of my cuff. So I'll have three layers total. But you don't need to just do three, you can do as many as you want.
Now pull the string tight, and tie it off.
Now all you need to do is put it on, and show it off! :]