Zebra Hand Ring Display :)

A super fab./easy way to show off your rings!

Posted by Dani

About

I am a big fan of rings but I am extrememly tired of not having a display for them where they can just sit on my dresser and remind me 2 actually put them on my fingers :P

I checked out other ring displays but couldn't find one that suited my taste or that wasn't expensive :/ So I came up w/this hand ring display :) It turned out allot better than I had hoped and many people have admired it so I decided to share it w/you guys :D Note that this is my 1st tutorial so I hope everything makes sense lol ;)

Share

You Will Need (8 things)

  • 1 cup Table Salt
  • 3 tbsp Wallpaper Paste
  • Aluminium Foil
  • Varnish
  • A small piece of Felt
  • Acrylic Paint
  • 1 cup Water (Approx.)
  • 2 cup Wheat Flour

Steps (13 steps, 210 minutes)

  1. 1

    Take a strip of the aluminum foil (approx. 4 inches wide)fold the aluminum in half so that it is half the length but the same width and begin to form this into a straight 'stick.'( for lack of a better word :P)

    This is going to be the base for your fingers, this stick will be very thin (about the width of a pencil) but will provide some support later on... Form the foil so that the stick is about 4 in. tall (or however long u want your fingers.. Make 5 of these but varying the lengths slightly to make it a more reallistic hand.

  2. 2

    Take another piece of foil and find a rock that's a little smaller than a tennis ball

  3. 3

    Begin to form the foil over your rock, add additional pieces of foil and start to shape into the palm of a hand...

  4. 4

    Continue adding foil and build layer upon layer until your creation resemble's the pic. Making sure that you have built up around the back and sides so that you can later attach the fingers...

  5. 5

    Attach fingers to base by positioning them on the wall of foil you built in the previous step.
    Take strips of foil and shape around fingers and base. Adding numerous strips over entire base for support and especially around and in between fingers.

  6. 6

    Now it's time to make salt dough for covering the hand:)

    Mix the flour and salt until combined.

    Add water a little at a time and cut into flour mixture, (you may need more or less water)Add wallpaper paste (opptional, give the dough more elasticity) and mix until it's spread evenly throughout.

    The dough should be easy to work w/and should not stick to your hands or be dry..

    If such is the case: for sticky dough add flour and if the dough is too dry add water:)

  7. 7

    Begin to cover the hand w/dough, using a little at a time and forming over the aluminum. Smoothing and shaping all the while.

    (You will want to cover the dough while it's not in use b/c it does dry out rather quickly.)

    Also make sure that the dough is not too thick, this will mess up the baking time and you will need to be able to fit your smallest ring on the fingers easily:)

  8. 8

    When finished your project should look something like this:

    Rather grotesque I know but hey :P

  9. 9

    You can add an impression/design if you like with a knife anywhere on the surface of the dough

  10. 10

    Now you must bake your creation in an oven on a light colored cookie sheet. Starting off at 170 degrees F. baking for 1/2 hour then turning the oven up to 200 degrees and baking 1 hour.

    Let cool completely.

  11. 11

    Using acrylic paint and as many colors/designs you choose decorated the hand to your liking.

    (I used fabric paint for the pink around the heart and the rest was acrylic)

    Let dry

    Coat w/clear varnish

    Let dry

  12. 12

    Add a small circular piece of felt to bottom w/glue to prevent scratching surfaces.

  13. 13

    Horray!! You're finished :D