https://www.cutoutandkeep.net/projects/wire-dragonfly-3 • Posted by gloria c.
Here is what you will need.
Take the wire and fold in half, but leave a curve on the bottom, then put the five beads on the wire.
Make the little wings like the image.
Make the secondary wings, a little bigger than the first.
Fold the wire down to the back (the back will be the front when is ready).
Then turn the wire up from the front, this will make sure that the wings don't move.
Put the other bead on the top and turn the top of the wire.
Put the pin through the red bead. in a way that it wont come out. If you follow the steps, you will have the right place to put it.
Right there!
Done.