Vintage One Piece Swimsuit

Inspired by my love of The Little Mermaid <3

Posted by rsky

About

I LOVE vintage swimsuits and I found the perfect one on modcloth.com. However, that swimsuit was very over priced. I made this for around $18, but the fabric was on sale ($10/yard!), compared to $90.

****Make sure you get a ballpoint needle when working with spandex! It will save you many tears!! And use a zigzag stitch.******

Share

You Will Need (4 things)

  • 1 ½ yd Spandex or so
  • 1 Ballpoint Needle
  • 50 l Patience
  • Thread

Steps (9 steps, 480 minutes)

  1. 1

    Firstly, Gather Your Materials!
    I used about a yard of spandex, taking into account the amount of ruching I would do.
    You will definitely need a ballpoint needle for this.
    I suppose you need newspaper or some large bit of paper for the pattern.
    Don't approach without patience, or it will take you many days like it did me, lol.

  2. 2

    Now you need your measurements for the pattern. You need your bust, overbust? (whatever that is called), waist, and hip measurements. These measurements will all be chopped in half for the next step.
    The only measurement not used in half would be the length (where you want the bust to start down to your crotch).

  3. 3

    For the back piece, I marked a center line with the measurement from where I wanted the bust to start and to my crotch. From there, mark out your bust line, making sure it's even on both sides of the center line. Do the same for your waist and hip measurements.
    Draw how you want your booty bit to be cut, and finish by making a line across using your overbust measurement (in half!).

  4. 4

    For the front piece, I ruched it QUITE a bit (which was the bane of my sewing existence! XD but worth it :P). So, to ensure having enough fabric, I measured the length of my torso, below my bust and to my hips, and multiplied that by 3. I kept the curve of my waist, but didn't make it too extreme. You basically want to keep the shape the same as the back piece, but I drew out a heartshaped neckline, and drew the legholes out to be a bit higher.

  5. 5

    Now you want to ruche the front piece! I will assume now that you know how to ruche, because I do not know how to explain, for I am terrible at it! I will tell you however, that you want to ruche so much that the front piece is now as long as the back piece. I recommend doing a topstich over the ruching.

  6. 6

    Now, You should attach the front and back pieces together. Simple? That's what I thought.

  7. 7

    At this point you should hem the neckline and legholes. Again, simple as simple gets.

  8. 8

    Now, you have a choice to make- leave it strapless OR add the halter strap that I did. To add the halter strap, take your measuring tape with the suit on, and measure from one side to the other, I hope this makes sense?

  9. 9

    So now take that measurement and make a shape like