https://www.cutoutandkeep.net/projects/urban-organizer • Posted by Octopus Publishing
Urban Organizer has a nice ring to it, don’t you think? Many of us hope to be more organized – urban or not, we could all use more storage. A place for incoming and outgoing mail, a spot for the latest magazine we haven’t yet had a moment to savour, somewhere where the elusive TV remote, keys and reading glasses can all be tucked away and quickly found in handy pockets. Oh, I do love a handy pocket! This unique catch-all is really a sturdy curtain, easily hung from a rod that is either attached to a wall or door for optimal use of space. How handy to have a place for all these things, and one that takes up such a small amount of space itself. TIP This project could easily be modified for use as an art supply caddy, a homework station, and a craft centre… there are so many possibilities! NOTE All seam allowances are 1cm (3/ 8in) unless otherwise stated
Urban Organizer has a nice ring to it, don’t you think? Many of us hope to be more organized – urban or not, we could all use more storage. A place for incoming and outgoing mail, a spot for the latest magazine we haven’t yet had a moment to savour, somewhere where the elusive TV remote, keys and reading glasses can all be tucked away and quickly found in handy pockets. Oh, I do love a handy pocket! This unique catch-all is really a sturdy curtain, easily hung from a rod that is either attached to a wall or door for optimal use of space. How handy to have a place for all these things, and one that takes up such a small amount of space itself. TIP This project could easily be modified for use as an art supply caddy, a homework station, and a craft centre… there are so many possibilities! NOTE All seam allowances are 1cm (3/ 8in) unless otherwise stated
1. Prepare your fabric For the main curtain: cut one 66 x 129.5cm (26 x 51in) rectangle from the main fabric and one 66 x 129.5cm (26 x 51in) rectangle from the lining fabric. For the print pockets: cut two 18 x 30.5cm (7 x 12in) rectangles; two 24 x 30.5cm (9½ x 12in) rectangles; two 28 x 30.5cm (11 x 12in) rectangles from the print fabric. For the small pockets: cut four 15 x 18cm (6 x 7in) rectangles from the main fabric. For the pocket linings: cut two 18 x 30.5cm (7 x 12in) rectangles; two 24 x 30.5cm (9½ x 12in) rectangles; two 28 x 30.5cm (11 x 12in) rectangles; four 15 x 18cm (6 x 7in) rectangles from the lining fabric. From the interfacing: cut two 18 x 30.5cm (7 x 12in) rectangles; two 24 x 30.5cm (9½ x 12in) rectangles; two 28 x 30.5cm (11 x 12in) rectangles; four 15 x 18cm (6 x 7in) rectangles. From the webbing: cut five 25.5cm (10in) lengths. Begin by fusing the interfacing to the corresponding pocket lining pieces following the manufacturer’s instructions, then set them aside.
Sew the main curtain Fold the webbing lengths in half. Pin the ends of one folded length of webbing to the right side of your main fabric rectangle along the top edge, placing it 2.5cm (1in) in from the side edge, matching raw edges, with the fold facing inward. Pin a second folded length of webbing 2.5cm (1in) in from the opposite side edge. Pin the remaining 3 folded webbing lengths evenly spaced along the top edge. Tack the webbing in place.
Place the lining rectangle on top of the main rectangle, right sides facing and matching raw edges. Pin and then stitch all 4 sides, making sure to leave a 15cm (6in) opening for turning.
Turn right side out, fold under the seam allowance at the opening and press. Top-stitch along the top and bottom edge, this will close the opening. I used a decorative stitch on my machine for the bottom edge to add interest; however you can use a simple straight stitch if you prefer.
Prepare the pockets If you wish to add embellishment to your pockets, do so at this stage by attaching ribbon or buttons, or using decorative stitches on the front of your pocket pieces. All of the pockets are sewn using the same method: place each pocket front piece with a corresponding interfaced lining pocket piece, right sides facing and raw edges matching, and pin along the seam allowances on all sides. Stitch the seam, leaving a 7.5cm (3in) opening at the top edge of your pocket for turning. Clip the corners of the sewn pocket.
Turn the pocket right side out. Fold under the seam allowance at the opening and press carefully. To finish the pocket, top-stitch along the top edge only, this will close the opening. Repeat this process for the remaining pockets.
Attach the pockets Take your two 15 x 28cm (6 x 11in) finished pockets; these will be the top pockets of your organizer. Place one of the pockets 13cm (5in) down from the top edge and 2.5cm (1in) in from the left-hand side and pin in place. Repeat for the second pocket on the right-hand side of the organizer, leaving a gap of approx. 2.5cm (1in) between the two pockets.
Stitch the pockets in place close to the pocket edges around the sides and bottom edge of the pocket, backstitching at the beginning and end of your stitching.
Next, take the four 13 x 15cm (5 x 6in) finished pockets; these will be your second row of pockets on the organizer. Place one of the pockets 10cm (4in) down from the bottom edge of the top pockets and 2.5cm (1in) in from the left-hand side of the organizer. Pin in place. Repeat for a second pocket on the right-hand side. Place the remaining two small pockets evenly spaced between the outer two pockets, leaving a gap of approx. 2.5cm (1in) between all the pockets. Stitch the pockets to the organizer.
Take the two 21.5 x 28cm (8½ x 11in) finished pockets; these will be your third row of pockets. Place one of the pockets 10cm (4in) down from the bottom edge of the previous row of pockets and 2.5cm (1in) in from the left-hand side. Pin in place. Repeat for the second pocket on the right-hand side of the organizer. Stitch the pockets to the organizer. Finally, take the two 25.5 x 28cm (10 x 11in) finished pockets for the bottom row. Place one of the pockets 10cm (4in) down from the bottom edge of the previous row of pockets and 2.5cm (1in) in from the left-hand side of the organizer. Pin in place. Repeat for the second pocket on the right-hand side. Stitch the pockets to the organizer.
The Urban Organizer is now ready to be hung in the same fashion as a tab top curtain from a rod attached to the wall or door. You will want to make sure it is fairly sturdy and secure to take the weight of your stored items.