About

Cost: $ $ $ $ $

Difficulty: • • • • •

Time: 15 mins

Upgrade your cheap metal jewelry with this easy trick!
I’m a fan of jewelry. I especially love the ones from stores like J.Crew, Madewell and Free People, but sadly I do not have the budget to buy all the ones I want. So I turn to Forever 21 or H&M for similar items. Sometimes I think it’s better to buy the cheap jewelry because I don’t have to worry if I accidentally lose it or break it. It was just a few bucks and didn’t make a big dent in my budget.

However the downfall of the cheap jewelry is how easily they tarnish and can leave my fingers or wrists or whatever body part it comes in contact to green. And the design may look nice, but the metal usually has a cheap sheen.

Posted by Meesh N. • Published 9th November 2014 • See Meesh N.'s 7 projects »

Print • Embed

Xfluffy_unitatoX favorited Upgrade Cheap Metal Jewelry 18 Nov 00:24
mmotse03 favorited Upgrade Cheap Metal Jewelry 25 Feb 00:48
Kinhime Dragon favorited Upgrade Cheap Metal Jewelry 11 Nov 15:49
Glenda A. favorited Upgrade Cheap Metal Jewelry 09 Nov 15:23
Meesh N. published their project Upgrade Cheap Metal Jewelry 06 Aug 20:00

Step 1
Krylon UV-Resistant Clear Gloss Spray Paint – To keep your jewelry from tarnishing and leaving you green

Krylon UV-Resistant Clear Matte Spray Paint – To upgrade your too shiny jewelry to a luxe-looking one
Step 2
CLEAR SPRAY PAINT
Clean then lay out your jewelry that you want to coat with the paint. Shake the can and give the jewelry a good spray.

I’ve done this on necklaces and rings only so far and found that the chains and any moving parts will get a little stiff from the paint, but if you bend and work the chains it will quickly go back to normal.

Allow it to dry then flip the items over to spray the other side.
Step 3
MATTE SPRAY PAINT
Clean and wipe down your jewelry. Make sure there aren’t any finger prints or oils on the jewelry because the matte paint will not adhere correctly. When you spray the jewelry is it important you make even passes back and forth. Do not concentrate in one area longer than the other, the matte paint will focus there and be made obvious once it dries.
This necklace was the first piece I tested the matte spray on and I made all the mistakes I warned you of.
Step 4
Here’s close up. On the left I accidentally sprayed too much paint in one area and on the right you should be able to make out my finger print.
Step 5
This is before and after of a necklace once I got the hang of spraying the paint correctly. I had forgotten to take a “before” picture of the front of the necklace so this a shot of the back of the necklace, it was the same type of shiny sheen as the front.

Before
Step 6
After
For both sprays make sure to not do this directly under the sun and do not let it dry in the direct sun. The heat will make the acrylic paint crinkle and crackle while it is drying. Also, make sure to give the jewelry ample time to dry and air out. The smell from the paints will last long after the pieces dry, so be patient and let them air out before you wear them.