Upcycled Cigar Box Bird Feeder

Bird Feeder made out of an old cigar box

https://www.cutoutandkeep.net/projects/upcycled-cigar-box-bird-feeder • Posted by Harmonees.creations

This is a great project for gardeners or anyone who loves birds!

You will need

medium to large Wooden Cigar Box 1 cordless or craft Drill 1 Drill Bit to drill hole big enough for rope 1 Rope or thick ribbon

Project Budget

Time

Difficulty

Description

This is a great project for gardeners or anyone who loves birds!

Instructions

1. 

   Cigar box must have top lid. Take lid off of your cigar box. Be careful (With out breaking the bottom)

2. 

   Using drill and drill bit... drill holes big enough to easily put your rope through(or thick ribbon). Drill hole in center of lid and All four even corners (shown in photo two of finished project)

3. 

   Take 4 pieces of your rope (or thick ribbon) and tie knots in each one of the 4 holes you drilled in the bottom. Bring the 4 strings of rope through the top... tie a knot below the lid... Leave enough room for birds to feed.

4. 

   Tie once more above the cigar lid (making it tight). Make sure all four rope strings (or thick ribbon strings) are at equal length. You're done! Happy bird feeding!