https://www.cutoutandkeep.net/projects/upcycle-your-old-shirt-into-a-bracelet • Posted by lana red
1. Take 6 pieces of fabric, mine are about 45 cm long and 1,5 cm wide. Place something heavy on the toppart to keep them in place. 2. Take right strip and follow the red line in the picture. 3. It should look like this. 4. Take the left strip and follow the red line in the picture. 5. It should look like this. 6. Now repeat steps 2 and 4. Pull on them, but not to tight! 7. Keep braiding until you have ure desired length. 8. Get you're glue gun or some textile glue and place a stripe of glue on top of the end. Do this on both sides. 9. Cut the fabric that is on the other side of the glue strip. Not the braided side! 10. It should look like this. 11. Put some glue on the outside of the braid, like shown in the picture. 12. Place the other outside against it and push them together until the glue has dried. 13. Measure the width of youre braid. 14. Cut a piece of fabric. The size should be 2x the width of your braid + 1 cm. 15. Fold the piece of fabric around the part where the bracelet is attached. And glue it together. All done!