Unique Handmade Jewelry Diy Dreamcatcher Earrings In 3 Simple Steps

About

You Will Need (3 things)

Steps (5 steps, 120 minutes)

1. 1

   Materials needed in the diy dreamcatcher earrings:

   1.5mm Aluminum Wire

   0.5mm Brass Wire

   Gemstone Bead (Natural Citrine)

   Earring Hook

   Cylindrical Object

   Flat Nose Plier

   Round Nose Plier

   Side Cutting Plier

2. 2

   Step 1: Work the frame

   1. Cut a 15cm long piece of aluminum wire, and make a simple loop around a beading awl;

   2. Wrap the shorter end around the longer one to close the loop off;

   3. Form a loop at the top with a pair of round nose pliers;

   4. Coil the excess wire around the base of the loop several times;

   5. Finally, trim of the leftovers. This is what the frame of your DIY dream catcher earrings should look like.

3. 3

   Step 2: Wrap the dream catcher net

   1. Take a fairly long 0.5mm piece of brass wire, and fix one end on the frame by coiling it around for several turns;

   2. Keep wrapping the wire around the circle while adding beads in the center of the dream catcher;

   3. Fix the end firmly by creating several coils and you’re done the main part of earring.

4. 4

   Step 3: Add the earring hooks

   Open the loop on the earring hook, and then attach on the dream catcher component.

5. 5

   Repeat the previous steps above for the second earring to complete the pair.

   You can make different versions of this design by using different beads and wire. What’s more, is that the two types of wires used to make this unique handmade jewelry project for this pair of DIY dream catcher earrings are all easily available on Pandahall, which provides you with a convenient and economical shopping experience.