Unicorn Necklace

broach turned into cute necklace for a little girl!

https://www.cutoutandkeep.net/projects/unicorn-necklace • Posted by Amanda T.

I made this for my cousin's daughter using a pin that she liked, but would most likely never wear! I uset my pliers and VERY CAREFULY bent the back of the pin into a loop. If you use too much presure or twist too much the weld holding the pin on may break off. (super glue or hot glue may fix this lol). I attached the newley made pendant on with a jump ring in the center of the chain, and evenly placed the bead strands I made with the pins along both sides.

You will need

1 Old Pin Or Broachto be made into pendant Wire Cutters , Round Pliers, Jump Ringsammount of jump rings depends on how many pins you add on, plus one for the pendant Chain , Head Pins, Beadsdepend on how many you want

Project Budget

Time

Difficulty

Description

I made this for my cousin's daughter using a pin that she liked, but would most likely never wear! I uset my pliers and VERY CAREFULY bent the back of the pin into a loop. If you use too much presure or twist too much the weld holding the pin on may break off. (super glue or hot glue may fix this lol). I attached the newley made pendant on with a jump ring in the center of the chain, and evenly placed the bead strands I made with the pins along both sides.

Instructions