Twinkling Patterned Lampshade

Easy cardboard craft!

Posted by Muhaiminah Faiz

About

This lampshade can be made easily out of cardboard. It requires few materials and it's pretty easy to make. Check out the tutorial and make one :)

Share

You Will Need (5 things)

  • Light fitting
  • Glue
  • X-acto Knife
  • Pointy Object
  • Cardboard

Steps (5 steps, 60 minutes)

  1. 1

    Cut out a piece of cardboard and draw stripes with a pencil on it (these stripes are the folding lines).
    Keep 2 inches gap between the strpes.
    Draw any kind of design between the stripes with a pencil.
    Use something hard with a pointy edge to pop holes on the design.

  2. 2

    BE CAREFUL: Place a thermocol sheet under the cardboard piece on a flat surface and then pop holes, otherwise you might pop your finger like I did!

  3. 3

    When you're done with popping the holes, use highlighters to outline over the design. The colors of the highlighters (a small area around the hole) will sparkle when the lamp light is on, which looks beautiful.
    You can use other techniques for color reflection, I couldn't come up with anything else.

  4. 4

    Now, simply fold the cardboard along the stripes and glue the sides.
    Make a cover using a small piece of cardboard and glue it on the top of the folded cardboard (shade).

  5. 5

    When you're done making the shade simply place it over the light fitting and see the magical light pattern!
    The light effect looks great when the room is dark.