True Kettle Stitch

About

You Will Need (2 things)

Steps (1 step, 1 minutes)

1. 1

   Of all the stitches, this is the one that, when performed correctly, brings the most structure to your bindings. The true kettle stitch is used to link the heads and tails of the signatures together. To do this, guide the needle under the stitch that links the previous signatures, starting from the inside of the spine and pulling the needle toward the outside left or right of the spine. Continue to pull the thread until there is a small loop remaining. Guide
   the needle through the loop and tighten the stitch, pulling toward the most recent signature so the needle will easily point into the next signature.