Tie Neck Blouse

Get ready for spring with this easy, breezy layering piece.

Posted by Kaitlin H.

About

Turn any long sleeve blouse into a feminine, chic layering piece that's perfect for spring. This project is easy to create with either silky or cotton blouses. I've included two variations at the end.

Share

You Will Need (2 things)

  • Sewing Machine / Needle & Thread
  • Long Sleeve Blouse

Steps (13 steps, 60 minutes)

  1. 1

    If your blouse is silky, this is the easiest way to neatly remove the sleeves. (If it's cotton, cut off the sleeve, roll the edge under twice, and stitch in place.)

    Pull the sleeve through to the inside and pin.

  2. 2

    Stitch around the armhole, about an 1/8" from the edge.

  3. 3

    Cut sleeve off from the inside. Leave yourself enough fabric to edge stitch or fray check.

  4. 4

    Repeat with the other sleeve.

  5. 5

    From the removed sleeves, cut out strips to make into the neck tie. Make the strips twice as wide as the finished tie (+ 1/2" for seam allowance). I wanted my tie to fit neatly under the collar, so my strips were 2.5" wide to make a 1" finished tie. Each tie will be made from two strips, one long and one short.

  6. 6

    With right sides together, sew one short and one long strip together. Repeat with the other pair.

  7. 7

    With right sides together again, fold the strip in half lengthwise, press, and pin.

  8. 8

    Stitch down the raw edge. Cut one end at an angle and stitch closed.

  9. 9

    Turn the ties right side out and press. Turn under the ends with raw edges 1/2" and press.

  10. 10

    Flip up the collar. Line up a pressed-under end with the shoulder seam and stitch down. Repeat on the other side.

  11. 11

    Flip down the collar and you're done!

  12. 12

    Variation 1 - Fold under the collar and edge stitch around the neck. Attach ties to shoulder seams as usual.

  13. 13

    Variation 2 - Shorten a dress and make the neck ties from the extra.