Tape Measure Rosette Brooch

About

You Will Need (5 things)

Steps (6 steps, 20 minutes)

1. 1

   Leaving a few inches spare take your tape measure in both hands and pull each side towards each side towards its self.

2. 2

   using a needle sew the centres together, alternativly you can use some glue

3. 3

   Repeat this step untill you have 5 loops, sewing or guing each time.

4. 4

   now you need to create the second layer of loops.
   These loops need to be smaller than the ones below, 4 should be plenty

5. 5

   Once you are satisfied with the fullness of the brooch cut off the excess leaving enough tape to fold over the into a normal loop and stitch/ glue the underside.

6. 6

   With the excess strip, glue/sew this to the back of the brooch then attach a brooch back