Cut Out + Keep

Tamaki Suoh's Bear

From Ouran High School Host Club

https://www.cutoutandkeep.net/projects/tamaki-suohs-bear • Posted by Triceratops

I was watching Ouran and when I gotto the episode where Honey gets a cavity I thought,"Tamaki's bear is really cute." I discovered that they sold them but what's the point of buying a teddy bear without having some scraps left for other projects? I anyhoo I couldn't find a pattern for it so I made my own. Again.

You will need

Project Budget
Cheap

Time

9 h 00

Difficulty

So-so
Medium suoh 1312818372 Medium suoh  1  1312818421

Description

I was watching Ouran and when I gotto the episode where Honey gets a cavity I thought,"Tamaki's bear is really cute." I discovered that they sold them but what's the point of buying a teddy bear without having some scraps left for other projects? I anyhoo I couldn't find a pattern for it so I made my own. Again.

Instructions

  1. So trace all the stuff on your fleece. When you cut it our, leaf (Ha ha ha) about an 1/8 of an inch around all the shapes.

  2. Start with the small stuff. flip the ears around so the trace lines are showing. Sew around the egde until you have a little hole. Flip the ears inside out and stuff it. Leave it flipped and finish stitching so there aren't any holes left. Repeat with other ear.

  3. Now do the same with the legs/arms. Flip it so you see the trace lines. Sew until you get to the bottom. Take the cirle I labled as 'paw'. Fold the paw in half. Take one half of thr paw and sew it on the bottom of one side of the leg/arm. Now take the other side of the arm/leg and sew on the other half of the paw. Make sure you don't have any hole and continue stitching til you have a hole at the tope. Flip the arm/leg inside out and start stuffing. Finish the stitches so the stuffing cannot escape. You have just created your first arm/leg. Repeat with all arms and legs.

  4. Make and oval out of white felt or some other fabric. Cut the oval in half. Now, using the black felt make a rectangle. Cut that in half the long way. Out of black felt, make a 'V' and flip it upside down so it's like a fang. Take one of your face shapes and the white half-oval. Sew it on near the top so it looks like this: U U these will be your eyes. Now take the half of the rectangle and sew it on top of the eyes so it looks like this _ _ When your done with that the U U take the V and flip it so it looks like a fang. Sew it directly under the empty space between the eyes. You face sould now look something like this _ _ U U A

  5. Take both sides of the head and flip them so one has the face on the inside and the other has the trace lines facing out.Start sewing where the little cheek starts puffing out. When you get to the indent near the top of the head after the cheek puff, take one of your ears. Flip the head so you can see the face. Sew the ear on using this stitch - - - - when you get to the end of the ear go back to make sure the stuffing can't escape. The at the end of the ear that doesn't have anything sewn next to it, make a few of the stitches that you were doing before the ear came along. Flip inside out and repeat with other ear. Sew until you have a hole where the neck would be. Flip inside out and stuff. Finish stitches.

  6. The final stretch! Take a the Body Part 1s and flip them so you see the trace lines. Sew the curved edge but nothing else. Tie off thread. Take the Body Part 2s andsew them on the curved side with traced side facing out. Take one of the Body Part 2s and one of the Body part ones. They should both be flipped to see the trace lines. Take an arm/leg and do what you did with the ears. Flip the body so no trace line and use the - -stitch. When you get to the end check if there are no holes. On the other end without anything sewn next to it, make a few loop stitches. Flip back to outside in and continue sewing. When you get to the spot where you want the other arm/leg, flip back to no trace line and sew on the appendage the same way you did the ears and other leg/arm. Make a few more loopy stitches on the unsewn side and flip back to inside out. Finish stitches on that segment.

  7. At this point you should have a stuffed head an unstuffed, unfinished body. On the body you should have only one side without stitches. Sew on the side with trace lines until you get to the spot where you need an arm/leg. Flip the body so you don't see any trace lines. Sew on the arm/leg the same way you have the others. That includes the loop stitch on the open side. Flip inside out and sew till you get to the last arm/leg spot. Sew this one on the same way including loop stitches. You now shoul have the body flipped do you don't see the trace lines. Next to the last arm/leg you should a a small hole. Shove the stuffing through the hole until your bear is of satisfactory tubbiness. Close the hole.

  8. Now sew on the head. Make sure the head doesn't flop around to much using your now superior sewing skills. Make sure it doesn't flop around anyway you like.

  9. To finish, take that optional ribbon of yours and make a cute little bow. I got the idea of a bow from a picture I saw. So, you now have a cute little friend to hang out with. I named mine Suoh but you can name yours anything you wish.