Swirly Stud Earrings

Easy to make Stud earrings

https://www.cutoutandkeep.net/projects/swirly-stud-earrings • Posted by Muhaiminah Faiz

This is a perfect jewellery project for the simple jewellery lovers. Check out the tutorial to find out how I made these swirly wire stud earrings ^_^

You will need

Rubber Jewellery Pliers Craft Wire X Acto Knife

Project Budget

Time

Difficulty

Description

This is a perfect jewellery project for the simple jewellery lovers. Check out the tutorial to find out how I made these swirly wire stud earrings ^_^

Instructions

1. 

   Hold the wire from an end, Leave 2 cm of the wire straight an then make a loop by using the looping plier.

2. 

   Circle the wire around the loop 3-4 times to create a swirly pattern,

3. 

   Do not use the 2 cm part of the wire to make the swirl, this will be the stem of the earring.

4. 

   After making the swirl, flip it around, Rotate the 2cm part of the wire to 90 degrees, Cut the wire from the the bundle, notice the end of the swirl,

5. 

   Slightly bend and carefully push the end inside, at the back of the earring.

6. 

   You can use an eraser or rubber to make the earring backs.