About

Cost: $ $ $ $ $

Difficulty: • • • • •

Time: 20 mins

Follow the steps

Posted by Jenna C. from New York, New York, United States • Published 12th July 2010 • See Jenna C.'s 118 projects »

Print • Embed

Crafterella added Stud Double Ring to Princess Superstar 06 Dec 19:15
constantreader added Stud Double Ring to have to do 05 Jul 12:51
xxkayxx replied to a comment on Stud Double Ring 25 Nov 21:07
cristinakilljoyway favorited Stud Double Ring 22 Nov 19:19
acaju favorited Stud Double Ring 23 Jul 08:25
katthy.bejar favorited Stud Double Ring 07 Jul 04:06
TheGreenSprite favorited Stud Double Ring 21 Jun 02:57

Step 1

Watch the video.
Step 2
Gather materials and plug in your glue gun.
Step 3
Cut a piece of duct tape, around 5 inches.
Step 4
Fold over one side as shown.
Step 5
Fold over the other side.
Step 6
Stud (10 studs) in a very straight line on your piece of folded tape.
Step 7
Cut out the row of studs so that you can't see any tape.
Step 8
Here's what it will look like.
Step 9
Cut out a thin piece of tape and layer over the prong side of your stud strip. See video for more details on this step.
Step 10
Place a dot of glue on the side of one ring, and place the other ring alongside the glue as shown. See video for more details.
Step 11
Once rings are fastened together, place a dot of glue on the flat top of each ring.
Step 12
Set the rings down on the backside of the stud strip as shown.
Step 13
Hold until it is secure.
Step 14
Voila!! Haute!

Versions

+ Add your version

Posted by

Luiza S.

Posted by

TamrynRoxanne

Comments

Melody A. · Los Angeles, California, US 2nd June 2011

Where can you buy pyramid studs? I checked at my local Michaels and they didn't have any.

xxkayxx · Whitehaven, England, GB · 30 projects 25th November 2012

i get mine from ebay there the cheapest

♥ mitzi ♥ · 5 projects 31st July 2010

♥ amazing ♥

Yona D. · Concón, Valparaiso, CL · 3 projects 17th July 2010

Thank you so much for this tutorial! It was really useful

. I'm totally trying it even though i think i'll try to find a surface for the studs that's more rigid than the tape (i wouldn't like the ring to fold).