Cut Out + Keep

Steampunk Inspired Mechanical Eyepatch

Steampunk inspired mechanical iris eyepatch

https://www.cutoutandkeep.net/projects/steampunk-inspired-mechanical-eyepatch • Posted by alpha.omega

This is a project for my university. I wanted to incorporate mechanics in my creations for a long time.. Attitude Nobody really tells the attitude and the thoughts towards people. This eyepatch created for silent people, who are straightforward and ironic towards others. Inserted plexiglass lenses show that without words. The opening is based on an iris mechanism, creating a steampunk look.

You will need

Project Budget
Reasonably Priced

Time

60 h 00

Difficulty

Tricky
Medium 105372 2f2014 11 06 120608 cenzura1 Medium 105372 2f2014 11 06 120621 cenzura2 Medium 105372 2f2014 11 06 120624 cezura3

Description

This is a project for my university. I wanted to incorporate mechanics in my creations for a long time.. Attitude Nobody really tells the attitude and the thoughts towards people. This eyepatch created for silent people, who are straightforward and ironic towards others. Inserted plexiglass lenses show that without words. The opening is based on an iris mechanism, creating a steampunk look.

Instructions

  1. Small 105372 2f2014 11 06 123726 iriz

    For the iris mechanism I used this template, found on the internet (see attachments). You can also research on Google how the mechanism works

  2. Cut out all the shapes out of the brass sheet, sand the sharp corners and edges. Then, I made three extra pieces, so I could make mechanical iris box for the eyepatch. A back piece and a wall (around 7 milimeters wide) with an opening for the lenses to hold them together. Also, a piece, that holds the plexilass inside. Also, two handles on the sides so I could attach it.

  3. Small 105372 2f2014 11 06 123751 dscn0168

    After soldering the box, I started assembling the mechanism. Instead of the cut out parts in the template I used brass wire. After lots of adjustments i riveted everything in.

  4. Small 105372 2f2014 11 06 123800 dscn0052

    Also I made some plexiglass holders on the strap.

  5. As for the lenses, I went to a printing company and asked them to laser etch the pictures, but you can make your lenses out of anything. I thing colored lenses would look cool. Or even without them you are pretty bad ass looking.

  6. I got a long leather strap, where I sewed everything on with a simple thread. Oh, and I also put a thin strap of leather to hide all the imperfections and hide the opening for the lenses.

  7. Sand, polish and you're done!