https://www.cutoutandkeep.net/projects/soda-can-holder • Posted by Pei Ching L.
Inspired by a upcycled decorative items found in the recycled center...
Inspired by a upcycled decorative items found in the recycled center...
Cut the top of the soda can with a knife
Beware! This can be very sharp!
Cut the sode bottle into strips!
I've cut into 36 strips.. it depends on the pattern you plan to make
Slightly twist the strips and tie into a little pony tail using short can strips ( you cut from the top portion earlier)or you may use a fine wire
Something like this!
Use a tweezers to hold the tip of the strip and roll it all the way down like opening a sardine can.
Like this!
As I said earlier... I have 32 strips and I made a 'pony tail' out of 4 strips...so I have 8 patterns when I'm done. You can change to 62 strips and made something more define like a quilling pattern... that will be WOW!
Repeat the sbove steps until you done with all the strips...and let's have a soda! Happy trying!