About

Cost
$ $ $ $ $
Difficulty
• • • • •
Time
30 mins

Keep your skirt out of the mud, and show off those petticoats (or ankles!)

Posted by Raven W. from Brisbane, Queensland, Australia • Published See Raven W.'s 56 projects »
Tags

PrintEmbed
  • Step 1

    Cut your leather into inch wide (25mm) strips, at least 6" long (150mm). Cut the ends square, or rounded off.

    For alternative materials, cut wide enough so you can sew up an inch-wide strip. You want 4 with enough length so you can sew the clips on and have the length you want.

  • How to make an accessory. Skirt Hitches - Step 2
    Step 2

    Leather - Fold over the ends to give an inch on the back and punch a hole for the rivet in each end, through top and bottom.

  • Step 3

    Put the clips on the straps and fold the end back under. Push the rivet through, put the cap on and rivet together. Do the same for all 4 clips.

  • Step 4

    Other Materials - Put the clip on and turn enough under for a good seam. Sew it up neatly :) Repeat for the other clips.

Versions

Comments

susie
susie · Glasgow, Scotland, GB · 154 projects
after falling entirely in love with these on sight, I've decided to do a skirt project just so I can use them Happy
Raven W.
Raven W. · Brisbane, Queensland, AU · 70 projects
Happy cool, can't wait to see em!
Reply