Sharp Lighting
Add Sharp Lighting to a Dull Room.
Posted by BarryBelcher
About
Create a chandelier using mix and match flatware cutlery.
Share
You Will Need (9 things)
- 30 Flatware Knives
- Silver Wire or Craft Wire
- Decorative Casserole Metal base
- Copper Flower Pot chains
- Garage Clamp Lamp
- Ceiling Hook
- Drill
- Metal drill bit
- WD 40 Lubricant
Steps (9 steps, 180 minutes)
-
1
Drill small holes in the tips of every knife using a metal drill bit. Be sure to spray WD-40 on the area where drilling as a lubricant.
-
2
Find a base to an old casserole dish or something similar as the base for the top of your chandelier's knives to hang.
-
3
Hook 2 hanging flower pot chains at equal length across from each other on the base then take another chain and hook evenly from the other 2 chains to a ceiling hook.
-
4
Use metal wire and create a hook through the hole drilled in each knife tip.
-
5
Hang knives evenly around the casserole metal base.
-
6
Remove the clamp and shade from the clamp lamp.
-
7
Twine wire and bulb holder down the center of knives and up the chain hanging from ceiling hook.
-
8
Watch me make this here or follow instructions below.
-
9
Plug it in to add sharp lighting in a dull room.