Rubber Ducky Brooch
Rubber Ducky, you're the one...
Posted by LilyFantastico!
About
I made one of these ages ago for a friend, figured I'd make a how-to for it :)
Share
You Will Need (4 things)
- 3 different colours of Felt
- 1 Safety Pins
- Stuffing
- Thread
Steps (12 steps, 60 minutes)
-
1
firstly draw the basic shape of a rubber duck
-
2
cut out the seperate shapes and transfer onto card
-
3
you should end up with 5 pieces
-
4
draw around the templates onto the felt & then cut out.
I used black for the body, white for the eye/wing and pink for the beak/heart. -
5
next sew the heart onto the wing
-
6
once you've sewn the heart on to the wing, sew the wing onto the body.
-
7
then sew on the beak & the eye [sorry, I gorgot to take a picture of this!]
-
8
next get a small rectangle of black felt & attatch to the back piece of the duck's body, sewing along the top...
-
9
place the safety pin underneath the rectangle of felt & sew along the bottom, securing the safety pin in place.
-
10
sew the two body pieces together, leaving a small gap so that you can add the stuffing
-
11
lightly stuff the brooch & then finish by sewing up the gap
-
12
now all that's left is to wear it!
:D