Rock 'N Roll Bride Cameo Necklace

Crafter To The Stars #1: Cameo necklace for Kat from Rock 'N Roll Bride!

Posted by Cat Morley

About

Share

You Will Need (16 things)

  • Paper (for template)
  • Scissors
  • Xacto Knife
  • White, Pink, Black & Clear Shrink Plastic
  • Tweezers
  • Jewelry Chain
  • Glitter Glue or sparkly nail varnish
  • 2 Eye Pin(s)
  • 2 small black Bead(s)
  • Clasp
  • Beaded Trim
  • Wire Cutters
  • Crystals
  • Strong Adhesive
  • Jewellery Pliers
  • 1 large and 2 small Jump Ring(s)

Steps (19 steps, 90 minutes)

  1. 1

    Start with a portrait photo. For this we're using the beautiful Kat from Rock N' Roll bride.

  2. 2

    Trace around the silhouette on to paper. Make separate templates for the head, hair and the jewellery. Remember you’re template should be 7x bigger than you want your finished template to be.

    p.s. the iPad makes a great light-box.

  3. 3

    Cut out your templates and layer on top of each other. Create an oval template for your silhouette to sit on and then make a second slightly larger and third even larger oval template. Line up the two largest ovals and punch a hole through the top of both.

  4. 4

    Draw around the templates on to various colours of shrink plastic.

  5. 5

    Cut these out. When working with clear shrink plastic, use blue-tack to stick the template to the plastic and cut around it.

  6. 6

    To make a little charm for the chain, trace around the Rock n Roll Bride logo on to paper.

  7. 7

    Trace on to shrink plastic and carefully cut out.

  8. 8

    Shrink down all the pieces of plastic in an oven, following the directions on the packet, until they lay flat and leave to cool.

  9. 9

    Use a strong adhesive to carefully attach the head to the smallest oval and leave to dry.

  10. 10

    Glue the hair in to position.

  11. 11

    To give the jewellery a bit of sparkle, paint one side with glitter glue and position on the cameo.

  12. 12

    Layer and glue the ovals on top of each other, making sure the holes are aligned on the larger two.

  13. 13

    Glue some beaded trim around the middle oval.

  14. 14

    Glue small crystals around the edges of the largest oval.

  15. 15

    Slip a jump ring through the hole on the cameo and attach to the desired length of jewellery chain.

  16. 16

    Snip the chain a short way up on either side with wire cutters.

  17. 17

    Attach eye pins to the chain and slip on beads at either side. Attach the Rock n Roll Bride charm to one side and use a jump ring to attach it to the chain.

  18. 18

    Attach a clasp at the back.

  19. 19

    You're all done!