Rhinestone Cuff Bracelet
DIY Quick Gift
Posted by Jenna C.
About
Styling Tips:
1. Rhinestone bracelet accents add rockstar appeal to any look.
2. Wear them with our DIY slashed jeans!
Share
You Will Need (2 things)
- 3 Row Rhinestone Iron On Trim
- 1" Cotton Military Webbing - White
Steps (12 steps, 20 minutes)
-
1
Gather your materials and plug in your iron.
-
2
Cut strips of webbing after measuring it around the widest part of your hand (add 2" for gluing bracelet into a cuff).
-
3
Make pencil mark on webbing that shows size of your hand (and remember not to glue trim past this point).
-
4
Cut rhinestone trim accordingly, so that the length matches the webbing length up to the pencil mark.
-
5
For each piece of webbing, there should be two identical pieces of rhinestone trim (unless you want to mix-and-match colors, of course!)
-
6
Lay rhinestone trim on webbing and cover with a piece of paper.
-
7
Iron on high for 30 seconds, repeating process three times.
-
8
Let cool completely (and be careful, it's going to be hot).
-
9
Once cool, clip away any excess rhinestone trim.
-
10
Roll webbing in the shape of a cuff and glue together, using the 2" of webbing left un-embellished.
-
11
TIP: Hold with a clip while it dries.
-
12
Try on your new bracelets!