Reindeer

Adults and children alike will be unable to resist the charm of this soft toy.

Posted by Clare Youngs

About

Adults and children alike will be unable to resist the charm of this soft toy—you just want to pick it up and squeeze it! The embroidered decoration is a simple back stitch. You can change the size of the toy by enlarging or reducing the size of the templates, but do not make it too small as the antlers will be difficult to turn out.

Taken from Scandinavian Needlecraft by Clare Youngs, photography by Carolyn Barber and illustration by Kate Simunek, published by CICO Books. Text copyright Clare Youngs. Images copyright CICO Books.

Share

You Will Need (7 things)

  • Template s
  • Dressmaker’s Carbon Paper
  • 16 x 24 in. (40 x 60 cm) white boiled Wool Fabric
  • 5 x 7 in. (13 x 18 cm) white Felt
  • Scrap of orange Felt
  • Pink and orange stranded Embroidery Floss (cotton)
  • Soft toy Stuffing

Steps (10 steps, 120 minutes)

  1. 1

    Enlarge the reindeer templates by 200 percent, transfer onto the boiled wool fabric, and cut out.

  2. 2

    Using dressmaker’s carbon paper, transfer the embroidery pattern onto the white felt semicircles. Embroider the motif in back stitch and French knots, alternating between pink and orange as shown in the photo, below, and using three strands of floss (cotton). For the reindeer’s eyes, work three orange French knots close together, using all six strands of floss (cotton).

  3. 3

    With right sides together, pin one felt semicircle to each body piece, easing the fabric around the curve. Baste (tack) and machine stitch.

  4. 4

    With right sides together, pin and machine stitch one hoof section to the bottom of each inner leg piece.

  5. 5

    With right sides together, pin and machine stitch one hoof section to the bottom of each leg on the two body pieces.

  6. 6

    With right sides together, pin and machine stitch the inner legs to the two body pieces along the side and bottom edges.

  7. 7

    With right sides together, pin the underbelly to the two body pieces, taking care at each end to finish the stitching in a point. Baste (tack) and machine stitch, leaving a gap in the seam at the top of one of the front legs to turn the reindeer right side out.

  8. 8

    Starting where the inner legs join the body, pin and machine stitch the front and back together. Match up the line of stitching and carry on around, taking particular care on the curves of the antlers.

  9. 9

    Starting with the antlers, turn the reindeer right side out. Use the handle of a long, thin paintbrush to help ease the tips of the antlers out. Stuff the toy, using the paintbrush handle to get the stuffing right up to the ends of the antlers and taking care to keep the stuffing firm at the top of the legs.

  10. 10

    Turn under the raw edges at the gap in the front leg seam and slipstitch the gap closed.