Cut Out + Keep

Recycled Potato Head Parts Bag!

IDMommy Project: Recycled Potato Head Parts Bag!

https://www.cutoutandkeep.net/projects/recycled-potato-head-parts-bag • Posted by Gretchen F.

Sammy loves his Mr. Potato Head. They are best "spuds"...they even share each others' clothing and accessories. I've been frustrated for a long time with our current solution for storing Sammy's Mr. Potato Head parts. The plastic "Silly Suitcase" that they came in just is not up to par. The latch was too hard for him to open himself, so I had to put some tape on it to make it less strong. Now, of course, every time we pull it out of the toy box, the thing opens and dumps everywhere. Plus, it's a bit of a puzzle to get everything to fit back in there along with the big potato himself. In all fairness, I did get it at a garage sale for $4 so I can't complain too much. But, the whole thing was taped shut when I bought it...a clue that the previous owner had the same problem! However, the industrial designer in me does not like to put up with poorly designed products and the hassle they cause me. So, I got to thinking, I could easily make a drawstring bag for Mr. Potato Head and all of his "parts," like I've done for so many other things around the house. Then the idea came to me...what better material to use than an actual potato sack? So, I posted a request for potato sacks on my local Freecycle site, and soon had a generous sole willing to give me two bags. (Thank you, "Harris" in Plymouth!) After a little cutting and sewing, Mr. Potato Head and all of his parts have a new stylin' pad!

You will need

Project Budget
Cheap

Time

1 h 00

Difficulty

So-so
Medium img 5705 Medium img 5818 Medium potatohead

Description

Sammy loves his Mr. Potato Head. They are best "spuds"...they even share each others' clothing and accessories. I've been frustrated for a long time with our current solution for storing Sammy's Mr. Potato Head parts. The plastic "Silly Suitcase" that they came in just is not up to par. The latch was too hard for him to open himself, so I had to put some tape on it to make it less strong. Now, of course, every time we pull it out of the toy box, the thing opens and dumps everywhere. Plus, it's a bit of a puzzle to get everything to fit back in there along with the big potato himself. In all fairness, I did get it at a garage sale for $4 so I can't complain too much. But, the whole thing was taped shut when I bought it...a clue that the previous owner had the same problem! However, the industrial designer in me does not like to put up with poorly designed products and the hassle they cause me. So, I got to thinking, I could easily make a drawstring bag for Mr. Potato Head and all of his "parts," like I've done for so many other things around the house. Then the idea came to me...what better material to use than an actual potato sack? So, I posted a request for potato sacks on my local Freecycle site, and soon had a generous sole willing to give me two bags. (Thank you, "Harris" in Plymouth!) After a little cutting and sewing, Mr. Potato Head and all of his parts have a new stylin' pad!

Instructions

  1. Small img 5657

    Obtain some burlap. The bags I got were pretty nice and clean...all I really had to do was give them a good shake outside. I did some web searching and found some people have had success washing burlap, while others warn against it. It's always a good idea to test wash a small piece to see how it reacts. Some people also suggesting using Febreeze to remove any odors in the bags if necessary.

  2. Small cut burlap

    Cut out your pieces of burlap...I made mine 12" x 18", to allow plenty of room for wide seams, and space for Potato Head himself in the bag. I cut from the fold in, to eliminate one seam and utilize the already finished top edge of the burlap, so it's actually one 24" x 18" piece folded in half. But, you can cut two 12" x 18" pieces as well.

  3. Small cut iron ribbon

    Cut a couple piece of ribbon, about 3" or so, and iron them in half lengthwise.

  4. Small sew ribbons on edge

    Sew the 3" pieces of ribbon on the top edges of the bag, flush with the finished edge. These will help provide "reinforcements" where the draw string will go through the top of the bag.

  5. Small img 5666

    Fold the top (finished) edge down 1.5", so the ends of the ribbon pieces match, for the drawstring pocket.

  6. Small stitch pocket

    Sew along the finished edge, to create the drawstring pocket. I liked the look of the edge, so I am going to make that be on the outside of the bag. You'll want a pretty good stitch there for strength. I used a stitch that looks like a zig-zag between two parallel straight stitches (see below, center). If your machine doesn't have these "fancy" stitches, just a couple straight stitches in a row will do just fine too.

  7. Small sew side seam

    Fold your fabric back in half again, so that whatever side you want as the outside of the bag is folded on itself, inside out. Like I said, I wanted the rough pocket edge to show on mine, so I folded that side in. Next, sew along the edge opposite the fold: Start from the bottom of the ribbons (a), and sew at an angle in toward the bag for a 1/2"-1" or so (b). Then lift up the foot and turn the fabric parallel to the foot (c), and sew down the whole seam, stopping about an inch to inch and a half from the end (d). This will allow for your fringe along the bottom.

  8. Small img 5677

    Next, I did a wide zig-zag along the edge to help keep it from fraying.

  9. Small img 5678

    Here's what my stitches looked like, up by the drawstring pocket: (as you can see, I am no sewing machine pro by any means...)

  10. Small img 5679

    If you've used two pieces of burlap instead of a folded one like me, you'll need to sew the other side seam shut as well. Now your bag should be like a tube now with the top and bottom open. Turn it inside out.

  11. Small img 5683

    Lay a piece of ribbon across the bottom of the bag...you'll want it to be long enough to wrap around the front and back. So, for a 12" wide bag you'll want 24" of ribbon, etc. Position it about an inch or so above the bottom edge, but parallel to it. Sew it down the middle or inside edge of the ribbon to hold it in place. I sewed it in both places. Here I am going down the center:

  12. Small img 5684

    ...and then down the inside edge of the ribbon:

  13. I am leaving the outside half of the ribbon (the side that faces the bottom of the bag) right now so that we can make the fringe go up under the ribbon before sewing that part secure.

  14. Small img 5685

    Now this part would be fun for your child to help with...pull all the loose pieces of burlap off of the bottom until you reach the ribbon, creating fringe!

  15. Small img 5686

    Once you're done with that step it'll look like this:

  16. Small img 5687

    Now you can sew along the other edge of the ribbon, like this:

  17. Small img 5688

    Cut a 34" piece of ribbon (or cord or string, etc.) for the drawstring.

  18. Small img 5689

    Attach a large safety pin or diaper pin to one end,

  19. Small img 5689

    and fish it through the drawstring pocket.

  20. Small cord finishing

    Finish off the drawstring. I got one of those spring loaded slider things off of a bag that some of my bed sheets came in (a). Press the button down and thread your ribbon or string through (b). Slide it down to the bag (c). To keep my ribbon from fraying, I folded each end about 1/4" and ironed it (d), then sewed a zig-zag stitch across the end (e), to get a closed end on my drawstring (f). The zig-zag end will help keep the slider from coming off when my kids open the bag.

  21. Small img 5698

    Now you have a fully functional bag with a funky fringe-y bottom!

  22. Small applique

    You can leave it as-is, or if you'd like to decorate it, here's how I made a Potato Head applique on one side... 1) Get some felt...I used scraps I had from previous projects. Cut out all of your shapes...I traced all of mine so you can download my pattern here!

  23. Glue the pieces together with fabric glue. I didn't make a hat or ears just because I didn't have any green or pink felt around, but those would be fun additions! You can also use some iron-on adhesive like stitch witchery instead of glue.

  24. Small before after

    Glue the whole potato head man to the bag! TIPS: Slide a piece of wax paper inside the bag first to keep glue from seeping through and gluing the bag shut. Also, put glue on the back of the arms AFTER you've already glued down the body, as they are skinny and may want to flop around where you don't want them. This will help you place them right where you want them. And finally, position him closer to the bottom of the bag, as the top will get wrinkled up when the drawstring is pulled tight.

  25. Small img 5799

    Finally, a better solution to the "Silly Suitcase!" I only wish I had done this sooner! There's even plenty of space left for the additional "parts" that I'm sure he'll accumulate over the years. Okay, so they still end up all over the floor, but at least it's only when intentionally dumped out...