Princess Superstar Knuckle Rings
Rock a customized set of knuckle rings!
Posted by Cat Morley
About
Share
You Will Need (5 things)
- Scissors
- Super Glue
- Paper , blue-tack and pencil for the templates
- White & black Shrink Plastic
- 4 Ring Base s
Steps (13 steps, 90 minutes)
-
1
Start by tracing around your logo on to pieces of paper. Trace the individual letters on to a piece of paper and then draw an outline by tracing around the letters leaving a small margin.
The trickiest part of this project is getting the scale of your rings just right - remember you want your templates to be 7x the finished size of the ring.
P.S. using your computer screen as a light box works great!
-
2
Cut out the templates.
-
3
Place some blue-tack on to the back of the margin and stick down on to white shrink plastic.
-
4
Cut out the shrink plastic outlines.
-
5
Now trace around the letters on to black shrink plastic.
-
6
Cut these out.
-
7
Keep going until you have all the letters for your rings!
-
8
Shrink down all the pieces in the oven until small.
-
9
Start assembling the rings by carefully glueing the letters in place.
-
10
When you're finished, gather four rings.
-
11
Place them on your fingers to get the sizing right.
-
12
Glue on to the back of your rings.
-
13
You're all finished!