Pop Can Pendant

---uses the bottom of the can left over by other projects---

Posted by EstherC

About

A use for the bottom of the can -

Share

You Will Need (3 things)

  • 1 small round thing like a Tooth Pick
  • 2 Flat Screw Driver
  • 1 bottom of a Soda Can

Steps (12 steps, 20 minutes)

  1. 1

    take bottom left over by other crafts

    leave 1 notch as long as possible, trim down to 1/4 inch rim around the edge of the raised circle.

  2. 2

    I make large cuts that leave angled points

  3. 3

    I then smooth those out

  4. 4

    cut small notches to the raised ring

  5. 5

    bend back ever other flap

  6. 6

    use something flat to press the tab back flat

  7. 7

    Press down each tab into the ring
    (tucks the sharp edges inside)

  8. 8

    all tucked in

  9. 9

    roll the long tab over something round like a toothpick

  10. 10

    use your flat tool to press the tab down around the tooth pick and tuck the tab in like the others

  11. 11

    Now you have a pendant to hold your other art

  12. 12

    Here is an example piece a easy resin.